© Local AU Warehouse-Fast Shipping Within 3-7 Bussiness Days
© One Year Hassle-Free Warranty & 14-Day Return Service
© 100% Secure Checkout & Lifetime Customer Support
Creality Silent Mainboard advantages
- Super Quiet: The V4.2.7 mainboard comes with a low decibel and silent TMC2225 driver, which makes the sound of the printer running below 50 dB. Support BL-Touch auto-leveling and filament sensor
- Easy Installation: The firmware for Ender 3 /Ender 3 Pro / Ender 5 comes pre-installed NOW! You just plug them in and start printing!
- How to Flash the Firmware: Prepare an SD card less than 8GB, format it first, and then save the firmware in the SD card, making sure there is only firmware reserved in this card. Then plug the SD card into the card slot, turn on the printer and wait for around 10s, when the progress bar and interface appear, the firmware has been successfully updated.
- More Safer: Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically. The Board is Optimized by Circuit, effectively solving the heating problem.
If your machine comes with an 8-bit motherboard, please flash the 8-bit motherboard firmware.
If your machine comes with a 32-bit motherboard, please flash the 32-bit motherboard firmware.
Firstly, it would be good if I actually had the thing. It has not been delivered yet. The biggest problem is getting some 100% complete instructions on how to write the VS code for it with a BLTOUCH. Everything I read on the net is incomplete, does not work, has much of the required instructions missing. Most of these are written with the obvious belief that everyone holds several computer degrees in programming and do not cater for us amature users.
The difference in noise is amazing, there is none. Combined with the CR auto level my old ender 3 is like a new machine. Highly recommend the combination as an upgrade.
Official Creality Upgrade Silent Board V4.2.7 Mainboard for Ender 3/3 Pro/Ender5
The upgrade was straight forward and paired with BL touch (that plugged straight in), my printer is much nicer to work with.
Very highly recommended.
Sorry this is incorrect .I did get this board and it will not function in my ender 5 plus. I cant home the board properly .DoI need to re
install firmware? I have ordered a new board for the Ender5 plus which has not arrived. Can you please check what is happening to this order as it has been about a month since I ordered it? Thank You Trevor